Construction Programs



Blueprint Reading Course for the Trades

Date: Tues. 10/22/19-11/12/19; 6:00-9:00pm (4 sessions)
Location: Hyannis Center, 540 Main Street, Hyannis
Course Code: WPG394-67

Cost: $199
Register Now

 

If you work in manufacturing or the skilled trades, you could benefit from a baseline knowledge of reading blueprints. Our course will help you learn the skills you need to explore new career paths or improve your job performance in this field.

 



Construction Permitting and Inspections

Date: Sat. 11/16/19; 9am-3:30pm (1 session)
Location: Hyannis Center, 540 Main Street, Hyannis
Instructor: Mike Mendoza
Course Code: WPG393-67 

Cost: $99
Register Now

This program will help participants to develop basic knowledge of the Massachusetts State Building Code for residential and commercial properties and learn to interpret and apply the code requirements. 

 



100-Hour HVAC 


This Course is offered in Partnership with Gould Construction Institute. 

Date: Tues./Thurs. 9/17/2019 - 2/11/2020; 6:00-9:00pm
Location: Cape Cod Community College - Plymouth, Plymouth Municipal Airport, 246 South Meadow Road, Plymouth. Entrance available only through Gate 6. 
Course Code: WPG388-67

Cost: $1,907
GCI Member Rate: $1,618. Membership verification will be required. 
Reigster Now

This course consists of 108 classroom hours covering the following areas: Refrigeration Theory; Evaporators; Metering Devices; Condensers; Compressors; Refrigeration Accessories; Refrigerants; Operation, Pressures & Temperatures; AC and Refrigeration Math; Multi Temperature Systems; Other Refrigeration Systems; Motors; Purgers and Absorption Systems; Definitions from ASHRAE 15 & 34; The Mass Refrigeration Code. 

It is required that all students bring a copy of the current ASHRAE books (15 & 34) to class. 


 

OSHA 8-Hour Hazwoper Refresher

Date: Fri. 10/18/19; 8:30am-5:00pm, 1 session
Location: Hyannis Center, 540 Main Street, Hyannis
Instructor: Fran Kitteridge
Course Code: WET010-67

Cost: $179
Register Now

 

This 8-hour hazwoper refresher course covers the 29 CFR 1910.120 regulation, work-site safety, hazard communication, emergency action plans/contingency plans, fire protection/prevention, back safety and container handling, confined spaces, air monitoring, decontamination, personal protective equipment, and respiratory protection.

 



Sheet Metal Fabrication - Level 1

This Course is offered in Partnership with Gould Construction Institute.

Date: Tues./Thurs. 9/17/2019 - 3/31/2020; 6:00-9:00pm
Location: Cape Cod Community College - Plymouth, Plymouth Municipal Airport, 246 South Meadow Road, Plymouth. Entrance available only through Gate 6. 
Course Code: WPG389-67

Cost: $1,682 
GCI Member Rate: $1,393. Membership verification will be required. 
Register Now

This course consists of 150 classroom hours covering the following areas: Basic Safety; Introduction to Construction Math; Introduction to Hand Tools; Introduction to Power Tools; Introduction to Construction Drawings; Basic Rigging; Basic Communication Skills; Basic Employability Skills; Introduction to Materials Handling; Introduction to the Sheet Metal/ HVAC Trades; Basic Safety; Introduction to Hand Tools; Introduction to Power Tools; Introduction to M.G.L. c. 112, s. 237-251 and 271 CMR; Basic Rigging; Introduction to Materials Handling; Basic Communication and Employability Skills; Introduction to Construction Math; Introduction to Construction Drawings; Tools of the Trade and Installation of Ductwork.

 



Sheet Metal Fabrication - Level 2 (Hands-on)


This Course is offered in Partnership with Gould Construction Institute.

Date: Tues./Thurs. 9/17/2019 - 3/31/2020; 6:00-9:00pm
Location: Cape Cod Community College - Plymouth, Plymouth Municipal Airport, 246 South Meadow Road, Plymouth. Entrance available only through Gate 6. 
Course Code: WPG390-67

Cost: $1,907
GCI Member Rate: $1,618. Membership verification will be required. 
Register Now

This course consists of 150 classroom hours covering the following areas: Safety Review; Trade Math 104; Shop Production and Organization; Installation of Air Distribution Accessories; Air Systems; Duct Fabrication Standards; Introduction to Layout; Fabrication I – Parallel Line Development; Fabrication II – Radial Line Development; and Hands-on Shop Fabrication.

 

Unrestricted Construction Supervisor Exam Prep

Dates: Mon. 10/21/19-12/9/19; 6-9pm, 7 sessions (no class 11/11)
Location: Hyannis Center, 540 Main Street, Hyannis
Instructor: Michael Mendoza
Course Code: WPG078-67

Cost: $379 
Register Now

This course is for those who wish to be licensed for construction, reconstruction, alteration, repair, removal, or demolition involving any activity regulated by the code. This license includes all of the Specialty Licenses. With this Unrestricted CSL, building permits can be applied for and obtained through the Building Departments in Massachusetts towns.

This course is 6 weeks of intense training and testing to equip students to take and pass the 75 question exam. Course will include AAB regulations, OSHA (text book version is recommended), 2015 IECC energy code, the 2015 IRC and IBC Code editions with their corresponding Mass amendments. Students must have the 2015 IBC Code with the matching Mass Amendments for the first day of class. A comprehensive review and examination of the Mass State Building Code will be provided to prepare construction professionals for the state license exam. Candidates must have proof of at least three plus years of construction experience required for eligibility to take state exam.

Important: MA State Building Code Books required. 

 

To learn how The Center for Corporate and Professional Education at Cape Cod Community College can customize a training program for your company or organization, contact Michelle Constantino, Contract Training and Employer Relations Manager, at 508.375.5014 or mconstantino@capecod.edu.